Description
Self Adhesive Flat Seal Pack 25mm x 2 Metres
Self Adhesive Flat Seal Pack 25mm x 2 Metres – Colour WHITE
Please Note that this is for one pack of flat seal in white
How to tell whether you need Self Adhesive Flat Seal, Ceramic Paper Strip, Standard or Soft Rope
Standard Rope (sometimes known as hard rope) This rope is only ever used around the edge of the stove door, never behind the glass. If you squeeze it gently it doesn’t compress much and has a firm feel due to the tight weave. To check the size of the rope required, pull away a little of your existing rope from your stove door and form it back into a round shape, then put a ruler across it to check the diameter.
Soft Rope. This rope is sometimes used around the edge of the stove door and also behind the glass. Squeeze the rope gently, it will compress to about a third of its size. If your stove door requires soft rope behind the glass, there will be a groove into which the soft rope will fit. Stove doors with no groove will require ceramic paper (see below).To check the size of the rope required, pull away a little of your existing rope from your stove door and form it back into a round shape, then put a ruler across it to check the diameter.
Ceramic Paper. This is only found behind the glass. It is very easy to cut and is either 6mm wide (1/4″) or 10mm wide (3/8″) and is about 3mm (1/8″) thick. If your stove is fitted with ceramic paper, simply remove all traces from the groove, cut to size and lay in the recess where the glass will sit, and hold in place with a couple of dabs of high temperature adhesive. Lay your glass on top and replace your clips and screws. Remember never to over-tighten, hand tight plus half a turn is tight enough.
Self-Adhesive Flat Seal. If your stove has what looks like rope behind the glass, but this rope is completely flat, you will find that this is probably not rope at all, but self-adhesive flat seal, this comes in widths of 12mm and 25mm. It looks like woven rope but has a sticking backing paper.
Go to our website below and click on our How to Videos to learn more
https://stovedoorglass.com/re-rope-fit-new-stove-door-glass/
Self Adhesive Flat Seal Pack 25mm x 2 Metres – Directions of use
- Remove the glass from the stove, and clean the glass and the stove removing old flat seal
- Cut the flat seal to the required length
- Remove the backing and apply into the door
- Press flat seal firmly
- Replace the glass
PLEASE NOTE: Packaging may vary but products will always be of the same high quality